RAM CHASSIS CAB 2024, Руководство пользователя

Страница: 28 / 360

WARNING!
•
Do not place anything on the steering wheel that
insulates against heat, such as a blanket or steer-
ing wheel covers of any type or material. This may
cause the steering wheel heater to overheat.
UCONNECT VOICE RECOGNITION —
IF EQUIPPED
INTRODUCING VOICE RECOGNITION
Start using Uconnect Voice Recognition with these help-
ful quick tips. It provides the key Voice Commands and
tips you need to know to control your vehicle’s Voice
Recognition (VR) system.
If you see the NAV icon on the bottom bar or in the Apps
menus of your 8.4-inch touchscreen, you have the
Uconnect 5 NAV system. If not, you have a Uconnect
5 with 8.4-inch display system.
BASIC VOICE COMMANDS
The following basic Voice Commands can be given at
any point while using your Uconnect system.
Push the VR button or for the Uconnect 5/5 NAV,
say the vehicle’s “Wake Up” word, “Hey, Uconnect”.
After the beep, say:
•
“
Cancel
” to stop a current voice session
•
“
Help
” to hear a list of suggested Voice Commands
•
“
Repeat
” to listen to the system prompts again
Notice the visual cues that inform you of your voice rec-
ognition system’s status. Cues appear on the
touchscreen.
NOTE:
On Uconnect 5 systems, the factory default “Wake Up”
word is set to “Hey, Uconnect” and can be repro-
grammed through the Uconnect Settings.
GET STARTED
All you need to control your Uconnect system with your
voice are the buttons on your steering wheel.
Helpful hints for using Voice Recognition:
•
Reduce background noise. Wind and passenger
conversations are examples of noise that may
impact recognition.
•
Speak clearly at a normal pace and volume while
facing straight ahead.
•
Each time you give a Voice Command, first push the
VR button, wait until after the beep, then say your
Voice Command. You can also say the vehicle “Wake
Up” word and state your command. Some examples
of “Wake Up” words include “Hey, Uconnect” or
“Hey, Ram”.
•
A passenger can press the VR button shortcut on
the radio status bar to also issue a command.
•
You can interrupt the help message or system
prompts by pushing the VR button and saying a
Voice Command from the current category.
Uconnect 3 With 5-inch Display
Uconnect Voice Command Buttons
1 — For The Uconnect 5/5 NAV System Vehicles
Equipped With Navigation: Push The Phone Button To
Begin Radio, Media, Navigation, Climate, Start Or
Answer A Phone Call, And Send Or Receive A Text
1 — For The Uconnect 5/5 NAV System Vehicles Not
Equipped With Navigation: Push The Phone Button To
Answer An Incoming Phone Call
2 — Push To Access The Tile Feature
3 — Push The Hang Up Button To End A Call Currently In
Progress
26 GETTING TO KNOW YOUR VEHICLE