RAM CHASSIS CAB 2024, Руководство пользователя

Страница: 66 / 360

•
Phones must always be placed on the wireless
charging pad within the outline shown on the pad so
that its charging parts connect with the charging
coils of the system. Movement of the phone during
charging may prevent or slow the rate of charge.
•
Having multiple applications open on the phone
while charging will reduce the charging efficiency,
and may even shut down an application that is
actively running (i.e. Apple CarPlay®). This may also
cause the phone to overheat.
•
Wireless chargers may implement certain methods to
prevent the phone from overheating during charging
such as slowing down the rate of charge. In certain
instances, the device may shut down for a brief period
of time (when the device reaches a certain tempera-
ture). If this happens, it does not mean there is a fault
with the wireless charging pad. This may just be a pro-
tective measure to prevent damage to the phone.
•
The use of multiple wireless functions at the same
time (wireless charging, Apple CarPlay®, Android
Auto™) could cause the device to overheat, resulting
in limitation of the functions or it turning off. In this
case, it is recommended to connect the system
using the USB port.
•
Do not place the key fob or any other type of metal/
magnetized object inside the mobile phone housing
or near the wireless charging pad.
•
With a compatible device placed on the charging
pad, and the ignition is cycled to the OFF position, a
reminder message may appear on the instrument
cluster display to warn the driver.
CAUTION!
The key fob should not be placed on the charging pad
or within 6 inches (15 cm) of it. Doing so can cause
excessive heat buildup and damage to the fob. Plac-
ing the fob in close proximity of the charging pad
blocks the fob from being detected by the vehicle and
prevents the vehicle from starting.
WINDOWS
POWER WINDOWS — IF EQUIPPED
The window controls on the driver's door control all the
door windows.
The passenger door windows can also be operated by
using the single window controls on the passenger door
trim panel. The window controls will operate only when
the ignition is in the ACC or ON/RUN position.
To open the window part way (manually), push the win-
dow switch down briefly and release.
NOTE:
The power window switches will remain active for up to
10 minutes after the ignition is placed in the OFF posi-
tion. Opening either front door will cancel this feature.
The timing is programmable within Uconnect Settings
page 165.
WARNING!
Never leave children unattended in a vehicle. Do not
leave the key fob in or near the vehicle or in a loca-
tion accessible to children, and do not leave the Key-
less Enter ‘n Go™ Ignition in the ACC or ON/RUN posi-
tion. Occupants, particularly unattended children, can
become entrapped by the windows while operating
the power window switches. Such entrapment may
result in serious injury or death.
AUTOMATIC WINDOW FEATURES —
IF EQUIPPED
Auto-Down Feature
The driver and front passenger door power window
switches have an Auto-Down feature. Push the window
switch down for a short briefly, then release, and the
window will go down automatically.
To stop the window from going all the way down during
the Auto-Down operation, pull up or push down on the
switch briefly.
Auto-Up Feature With Anti-Pinch Protection —
If Equipped
Lift the window switch up for a short briefly and release;
the window will go up automatically.
To stop the window from going all the way up during the
Auto-Up operation, push down on the switch briefly.
Power Window Switches
64 GETTING TO KNOW YOUR VEHICLE