RAM CHASSIS CAB 2024, Руководство пользователя

Страница: 149 / 360

NOTE:
•
If snow, ice, mud, or any foreign substance builds up
on the camera lenses, clean the lenses, rinse with
water, and dry with a soft cloth. Do not cover the
lenses.
•
If a malfunction with the system has occurred, see
an authorized dealer.
WARNING!
Drivers must be careful when backing up even when
using the Trailer Surround View Camera. Always
check carefully behind your vehicle, and be sure to
check for pedestrians, animals, other vehicles,
obstructions, or blind spots before backing up. You
are responsible for the safety of your surroundings
and must continue to pay attention while backing up.
Failure to do so can result in serious injury or death.
CAUTION!
•
To avoid vehicle damage, Trailer Surround View
should only be used as a parking aid. The Trailer
Surround View Camera is unable to view every
obstacle or object in your drive path.
•
To avoid vehicle damage, the vehicle must be
driven slowly when using Trailer Surround View to
be able to stop in time when an obstacle is seen. It
is recommended that the driver look frequently
over his/her shoulder when using Trailer Surround
View.
AUX CAMERA — IF EQUIPPED
Your vehicle may be equipped with one or two AUX Cam-
eras, which display a rearview image from the trailer on
the touchscreen.
NOTE:
Two Aux Cameras are only available on vehicles with
NAV equipped radios if the vehicle is not equipped with
a Center High Mounted Stop Lamp (CHMSL) and Sur-
round View Camera system.
Activation
The AUX Camera is activated by first pressing the
Backup Camera or Cargo Camera (if equipped) button
on the touchscreen, followed by the AUX button located
in the upper left corner of the rearview display. On
vehicles with Surround View Camera (if equipped), the
AUX Camera can be activated when the vehicle is in
REVERSE by first pressing the More Cams button in the
Surround view screen, followed by the AUX tab. The AUX
camera can also be activated when the vehicle is in
REVERSE by pressing the AUX button.
If equipped with two AUX Cameras, you can switch
between each camera by pressing the AUX 1 or AUX
2 buttons on the Trailer Camera display.
AUX 1 Camera Button
AUX 2 Camera Button
Deactivation
The AUX Camera is deactivated by pressing the touch-
screen X button in the upper right corner of the touch-
screen. This will return the display back to the previ-
ously displayed screen.
NOTE:
•
If the AUX button is pressed and no AUX Camera is
connected, the touchscreen will display a blue
screen along with the message “Camera System
Unavailable.” The screen can be exited out by press-
ing the touchscreen X button in the upper right hand
corner. This will return the display back to the previ-
ously displayed screen.
•
Zoom View is not available with the AUX Camera
feature.
•
The display will always default to the Trailer Camera
display AUX 1.
ENGINE RUNAWAY
Diesel engine runaway is a rare condition affecting die-
sel engines, where the engine consumes its own lubri-
cation oil and runs at higher and higher RPM until it
overspeeds to a point where it destroys itself due to
either mechanical failure or engine seizure through lack
of lubrication.
STARTING AND OPERATING 147
4