RAM CHASSIS CAB 2024, Руководство пользователя

Страница: 52 / 360

NOTE:
•
The Rain Sensing feature will not operate when the
wiper switch is in the low or high-speed position.
•
The Rain Sensing feature may not function properly
when ice, or dried salt water is present on the
windshield.
•
Use of products containing wax or silicone may
reduce Rain Sensing performance.
•
The Rain Sensing feature can be turned on and off
using the Uconnect system
page 165.
The Rain Sensing system has protection features for
the wiper blades and arms, and will not operate under
the following conditions:
•
Low Ambient Temperature
— When the ignition is
first placed in the ON position, the Rain Sensing
system will not operate until the wiper switch is
moved, vehicle speed is greater than 0 mph
(0 km/h), or the outside temperature is greater than
32°F (0°C).
•
Transmission In NEUTRAL Position
— When the igni-
tion is ON, and the transmission is in the NEUTRAL
position, the Rain Sensing system will not operate
until the wiper switch is moved, vehicle speed is
greater than 5 mph (8 km/h), or the gear selector is
moved out of the NEUTRAL position.
•
Remote Start Mode Inhibit
— On vehicles equipped
with the Remote Start system, Rain Sensing wipers
are not operational when the vehicle is in the
Remote Start mode. Once the operator is in the
vehicle and has placed the ignition switch in the
RUN position, Rain Sensing wiper operation can
resume, if it has been selected, and no other inhibit
conditions (mentioned previously) exist.
CLIMATE CONTROLS
The Climate Control system allows you to regulate the
temperature, air flow, and direction of air circulating
throughout the vehicle. The controls are located on the
touchscreen, on the sides of the touchscreen
(if equipped), or on the instrument panel below the
radio.
AUTOMATIC CLIMATE CONTROL
DESCRIPTIONS AND FUNCTIONS
NOTE:
Icons and descriptions can vary based upon vehicle
equipment.
MAX A/C Button
Press and release the MAX A/C button on
the touchscreen to change the current set-
ting to the coldest output of air. The MAX A/C
indicator illuminates when MAX A/C is on.
Pressing the button again will cause the MAX A/C
operation to exit. Pressing other settings will also cause
the MAX A/C to exit.
NOTE:
•
MAX A/C sets the control for maximum cooling
performance.
•
The MAX A/C button is only available on the
touchscreen.
Uconnect 5/5 NAV With 8.4-inch Display Automatic
Temperature Controls
Uconnect 5 NAV With 12-inch Display Automatic
Temperature Controls
50 GETTING TO KNOW YOUR VEHICLE