Trailer Light Check
This feature will run the trailer lights through a
sequence to check the trailer light function. It is avail-
able in the instrument cluster under the Trailer Tow
menu
When activated the feature will enable all of the exterior
lights sequentially for up to five minutes allowing time to
walk around and verify functionality. The following exterior
lights will remain on for the entirety of the sequence:
•
Park/Running Lamps
•
Side Marker Lamps (if equipped)
•
License Lamp
•
Signature Lamp (if equipped)
•
Low Beams
•
Fog Lamps (if equipped)
•
Daytime Running Lamps
During this time the following lights will sequence, each
activating for three seconds:
1. Brake and CHMSL (third brake light)
2. Left turn signal
3. Right turn signal
4. Reverse Lamps
5. High Beam
This light check sequence will continue for a total of five
minutes.
The sequence will only activate if the following condi-
tions are met:
•
Vehicle is equipped with the Trailer Tow Package
•
Vehicle is in PARK
•
Vehicle is not in motion
•
Ignition in ACC or RUN
•
Remote start is inactive
•
Brakes are not applied
•
Left turn signal is not applied
•
Right turn signal not applied
•
Hazard switch is not applied
The sequence will cancel if any of the following condi-
tions occur:
•
Brakes are applied
•
Vehicle is shifted from PARK
•
Vehicle is no longer stationary
•
Left turn signal activated from stalk
•
Right turn signal is activated from stalk
•
Hazard switch is activated
•
Any button on the key fob is pushed
•
Ignition button is pushed
•
High Beam stalk position is changed
•
Sequence is canceled in the instrument cluster
TOWING TIPS
Before setting out on a trip, practice turning, stopping,
and backing up the trailer in an area located away from
heavy traffic.
Automatic Transmission
The DRIVE range can be selected when towing. The
transmission controls include a drive strategy to avoid
frequent shifting when towing. However, if frequent
shifting does occur while in DRIVE, select TOW/HAUL
mode or select a lower gear range (using the Electronic
Range Select (ERS) shift control).
NOTE:
Using TOW/HAUL mode or selecting a lower gear range
(using the ERS shift control) while operating the vehicle
under heavy loading conditions will improve perfor-
mance and extend transmission life by reducing exces-
sive shifting and heat buildup. This action will also pro-
vide better engine braking.
6-Speed Automatic Transmission Only
When towing a loaded trailer up steep grades at low
speeds (20 mph [32 km/h] or below), holding your
vehicle in FIRST gear (using the ERS shift control) can
help to avoid transmission overheating.
If you regularly tow a trailer for more than 45 minutes of
continuous operation, then change the automatic trans-
mission fluid and filter(s) as specified for “police, taxi,
fleet, or frequent trailer towing.”
Seven-Pin Connector
1 — Backup Lamps
2 — Running Lamps
3 — Left Stop/Turn
4 — Ground
5 — Battery
6 — Right Stop/Turn
7 — Electric Brakes
STARTING AND OPERATING
159
4
Содержание CHASSIS CAB 2024
