1. Make sure the center handle is unlocked using the
vehicle emergency key located within the key fob
and rotate the center handle vertically to release
the divider side gates.
Center Handle And Lock
1 — Center Handle Lock
2 — Handle
3 — Unlocked Position
4 — Locked Position
2. With the side gates open, position the divider so
the outboard ends align with the intended slots in
the sides of the bed.
Aligning Gate To Slots
3. Rotate the side gates closed so that the outboard
ends are secured into the intended slots of the
bed.
4. Rotate the center handle horizontally to secure the
side gates in the closed position.
Side Gates Closed
5. Lock the center handle to secure the panel into
place.
Storage Position
The storage position for the bed divider is at the front
of the truck bed which maximizes the bed cargo area
when not in use.
To install the bed divider into the storage position,
perform the same steps as you would for the divider
position, except position the divider fully forward in the
bed against the front panel.
Storage Position
The outboard ends should be positioned in front of the
cargo tie-down loops.
GETTING TO KNOW YOUR VEHICLE 91
2
