RAM 1500 2025, Руководство пользователя

Страница: 181 / 372

REVERSE and the Trailer Reverse Steering Control
(TRSC) feature (if equipped) is activated.
Shifting to NEUTRAL from any gear will maintain the
selected view (Zoom or Standard) as long as the vehicle
is below 8 mph (13 km/h).
If the vehicle is in PARK, Zoom View is available until
the gear selector is placed in DRIVE or REVERSE and
speeds are at or above 8 mph (13 km/h).
NOTE:
●
If the vehicle is in DRIVE, NEUTRAL, or REVERSE, and
speed is greater than or equal to 8 mph (13 km/h),
Zoom View is unavailable and the icon will appear
grey.
●
While in Zoom View, the guidelines will not be visible.
For information on Auxiliary Cameras (if equipped), see
ð
page 181 .
SURROUND VIEW CAMERA SYSTEM — IF
EQUIPPED
The Surround View Camera system allows you to see
an on-screen image of the surroundings and the Top
View of your vehicle. This occurs whenever the gear
selector is in REVERSE or when enabled through the
Uconnect system. The Top View of the vehicle will
also show if any doors are open. The image will be
displayed on the touchscreen along with a caution note
“Check Entire Surroundings”. After five seconds, this
note will disappear. The Surround View Camera system
is comprised of four cameras located in the front grille,
rear tailgate and side mirrors.
NOTE:
●
Removing the tailgate will disable the Rear View
Camera function.
●
The Surround View Camera system has
programmable settings that may be selected through
the Uconnect system
ð
page 203 .
Press this button on the touchscreen to
enter the Surround View Camera menu in
the Uconnect system.
When the vehicle is shifted into REVERSE, the Rear View
and Top View is the default view of the system.
If the camera delay is turned on, the camera image will
display for up to 10 seconds after shifting out of
REVERSE. The camera image will stop displaying, close,
and display the previous screen if the vehicle speed
exceeds 8 mph (13 km/h), the vehicle is shifted into
PARK, or the ignition is placed in the OFF position. The
touchscreen X button on the touchscreen disables the
display of the camera image.
If the camera delay is turned off, the camera image will
close and display the previous screen after shifting out
of REVERSE.
If active guidelines are enabled, the lines are overlaid
on the image in the Rear View and Top View to illustrate
the width of the vehicle and its projected path based on
steering wheel position.
The guidelines have different colored zones to indicate
the distance an object in the view is from the rear of the
vehicle. Refer to the following chart:
Zone Distance To The Rear Of The Vehicle
Yellow 1 ft - 6.5 ft (30 cm - 2 m)
Green 6.5 ft or greater (2 m or greater)
Modes Of Operation
Standard Rear View can be manually activated by
selecting “Back Up Camera” through the Camera menu
within the Uconnect system.
Top View
The Top View will show in the Uconnect system with
Rear View or Front View in a split screen display. There
are integrated ParkSense arcs in the image at the front
and rear of the vehicle. The arcs will change color from
yellow to red corresponding the distance zones to the
oncoming object.
Surround View Camera View
NOTE:
●
Front tires will be seen in the image when the tires
are turned.
●
Due to wide angle cameras in the mirrors, the image
will appear distorted.
STARTING AND OPERATING 179
4
Red 0 - 1 ft (0 - 30 cm)