8. Repeat steps 2 through 3 for the rear pair of
latches.
9. Pull down on the handle to ensure the Slide
Locking Lever is fully engaged. Do this for both the
left and right side.
NOTE:
Also check to ensure the latch yellow bumpers
are forward of the bead on the underside of the
truck flange. Make sure that the Tonneau Cover is
positioned fully forward, so that the bumper clears
the bead.
Pull Up On Tonneau Cover Corners
10. Gently pull up on all four corners of the Tonneau
Cover to ensure that it is properly latched.
WARNING!
You must ensure the Tonneau Cover is properly
installed on the vehicle before driving. An unsecured
Tonneau Cover can fly off of the vehicle while in
motion, resulting in a collision, personal injury, and
death. Failure to follow this procedure can also
damage the vehicle and the Tonneau Cover.
CAUTION!
It is the driver’s responsibility to ensure the Tonneau
Cover is properly installed on the vehicle. Failure to
follow this procedure can result in detachment of the
Tonneau Cover from the vehicle and/or damage to
the vehicle/Tonneau Cover.
T
RI
-F
OLD
T
ONNEAU
C
OVER
C
LEANING
For proper cleaning of the Tonneau Cover, use Mopar®
Whitewall & Vinyl Top Cleaner and Mopar® Leather &
Vinyl Conditioner/Protectant.
98 GETTING TO KNOW YOUR VEHICLE