RAM 1500 2025, Руководство пользователя

Страница: 183 / 372

The camera delay system is turned off manually
through the Uconnect settings menu
ð
page 203 .
NOTE:
●
If snow, ice, mud, or any foreign substance builds up
on the camera lenses, clean the lenses, rinse with
water, and dry with a soft cloth. Do not cover the
lenses.
●
If a malfunction with the system has occurred, see
an authorized dealer.
WARNING!
Drivers must be careful when backing up even
when using the Surround View Camera. Always check
carefully behind your vehicle, and be sure to check
for pedestrians, animals, other vehicles, obstructions,
or blind spots before backing up. You are responsible
for the safety of your surroundings and must continue
to pay attention while backing up. Failure to do so can
result in serious injury or death.
CAUTION!
●
To avoid vehicle damage, Surround View should
only be used as a parking aid. The Surround View
camera is unable to view every obstacle or object
in your drive path.
●
To avoid vehicle damage, the vehicle must be
driven slowly when using Surround View to be able
to stop in time when an obstacle is seen. It is
recommended that the driver look frequently over
his/her shoulder when using Surround View.
For information on Auxiliary Cameras (if equipped), see
ð
page 181 .
F
ORWARD
F
ACING
C
AMERA
W
ITH
T
IRE
L
INES
— I
F
E
QUIPPED
The Forward Facing Camera displays a front view image
of the road ahead, along with tire lines to guide the
driver when driving on narrow roads. Tire lines can be
activated/deactivated through the Uconnect Settings.
Activation
The Forward Facing Camera can be activated in the
following ways:
●
Pressing the Forward Facing Camera button in the
Camera screen or Apps menu
●
Pressing the Forward Facing Camera button located
in the upper left corner of the Back Up camera
display
Once activated, the camera image will remain on as
long as the vehicle speed is below 8 mph (13 km/h).
Deactivation
The Forward Facing Camera is deactivated in the
following conditions:
●
The vehicle exceeds 8 mph (13 km/h), except when
vehicle is in 4WD Low.
●
The touchscreen X button is pressed.
●
The vehicle is shifted into PARK.
●
The ignition is placed in the OFF position.
NOTE:
If the vehicle is in 4WD Low, the Forward Facing Camera
image will be displayed until the touchscreen X button
is pressed or the ignition is placed in the OFF position.
T
URN
S
IGNAL
A
CTIVATED
B
LIND
S
POT
A
SSIST
— I
F
E
QUIPPED
When enabled in the Uconnect system and a turn signal
is activated, the corresponding side view mirror camera
will display in the radio. The camera will continue to
display as long as the turn signal is engaged. If “Only
With Trailer” is selected (if equipped), the camera will
only display when a trailer is connected to the vehicle
ð
page 203 .
WARNING!
Blind Spot Assist is only an aid to help detect objects
in the blind spot zones and may not provide alerts
when changing lanes under all driving conditions.
Even if your vehicle is equipped with the BSA system,
always check your vehicle's mirrors, glance over your
shoulder, and use turn signals before changing lanes.
Failure to do so can result in serious injury or death.
TRAILER CAMERAS — IF EQUIPPED
T
RAILER
S
URROUND
V
IEW
C
AMERA
S
YSTEM
— I
F
E
QUIPPED
The Trailer Surround View Camera system allows
you to see an on-screen image of the surroundings
and the Top View of a trailer using four mountable
cameras. This occurs whenever the More Cams
button is selected, or when enabled through the
Uconnect system. The image will be displayed on the
Uconnect display along with a caution note “Check
STARTING AND OPERATING 181
4