3. Swing the J Hook from the handle and push the
handle to the center and up, ensuring that the J
Hook is under the truck flange. Push up on the
handle firmly, locking it into the latched position.
J Hook Under Truck Flange
1 — Front Of Truck
2 — J Hook
NOTE:
Make sure the bumper is in front of the truck
flange bead.
Pull Handle Downward
4. Pull down on the handle to ensure the Slide
Locking Lever is fully engaged. Do this for both the
left and right side.
5. Unclip the stowage straps, and re-snap them to the
bow.
6. Unfold the Tonneau Cover to the second panel
position.
Incorrect Folding — Will Cause Damage
NOTE:
When folding the second and third panels, the
sections MUST be held together to avoid damage
to the cover material. Fold the panel gently. Do not
allow the panels to drop under their own weight.
Second Panel Position
NOTE:
Unfold the panel gently, and do not allow the
panels to drop under their own weight.
7.
Completely unfold the Tonneau Cover.
CAUTION!
The vehicle cannot be driven when the Tonneau
Cover is in the second panel position.
Position Two (Fully Unfolded)
GETTING TO KNOW YOUR VEHICLE 97
2
