L
INKING
A
ND
U
NLINKING
T
HE
K
EY
F
OB
T
O
M
EMORY
Your key fob can be programmed to recall one of two
saved memory profiles.
NOTE:
Before programming your key fob you must select the
“Personal Settings Linked to Key Fob” feature through
the Uconnect system
.
To program your key fob, perform the following:
1. Place the vehicle’s ignition in the OFF position.
2. Select a desired memory profile 1 or 2.
3. Once the profile has be recalled, push and release
button (1) or (2) accordingly. “Memory Profile Set”
(1 or 2) will display in the instrument cluster.
4. Push and release the lock button on the key fob
within 10 seconds.
NOTE:
Your key fob can be unlinked from your memory settings
by pushing and holding either memory profile 1 or 2,
followed by pushing the unlock button on the key fob
within 10 seconds.
M
EMORY
P
OSITION
R
ECALL
NOTE:
If a recall is attempted when the vehicle is not in PARK,
a message will display in the instrument cluster display.
To recall the memory settings for driver one or two,
push the desired memory button number (1 or 2) or
the unlock button on the key fob linked to the desired
memory position.
A recall can be canceled by pushing any of the memory
buttons (1 or 2) during a recall. When a recall is
canceled, the driver seat will stop moving. A delay of
one second will occur before another recall can be
selected.
SEATS
Seats are a part of the Occupant Restraint system of
the vehicle.
WARNING!
●
It is dangerous to ride in a cargo area, inside or
outside of a vehicle. In a collision, people riding in
these areas are more likely to be seriously injured
or killed.
●
Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat
belts. In a collision, people riding in these areas
are more likely to be seriously injured or killed.
●
Be sure everyone in your vehicle is in a seat and
using a seat belt properly.
M
ANUAL
A
DJUSTMENT
F
RONT
S
EATS
— I
F
E
QUIPPED
WARNING!
●
Adjusting a seat while the vehicle is moving is
dangerous. The sudden movement of the seat
could cause you to lose control. The seat belt
might not be adjusted properly and you could be
(Continued)
WARNING!
injured. Adjust the seat only while the vehicle is
parked.
●
Do not ride with the seatback reclined so that
the shoulder belt is no longer resting against your
chest. In a collision you could slide under the seat
belt and be seriously or even fatally injured. Use
the recliner only when the vehicle is parked.
Manual Front Seat Forward/Rearward
Adjustment
Both front seats are adjustable forward or rearward.
The manual seat adjustment handle is located under
the seat cushion at the front edge of each seat.
Manual Seat Adjustment Bar
While sitting in the seat, pull up on the handle and slide
the seat forward or rearward. Release the bar once you
have reached the desired position. Then, using body
pressure, move forward and rearward on the seat to be
sure that the seat adjusters have latched.
30 GETTING TO KNOW YOUR VEHICLE
