SYMBOLS KEY
WARNING!
These statements apply to operating pro-
cedures that could result in a collision,
bodily injury and/or death.
CAUTION!
These statements apply to procedures
that could result in damage to your vehi-
cle.
NOTE:
A suggestion which will improve installa-
tion, operation, and reliability. If not fol-
lowed, may result in damage.
TIP:
General ideas/solutions/suggestions on
easier use of the product or functionality.
PAGE REFERENCE ARROW
Follow this reference for additional infor-
mation on a particular feature.
FOOTNOTE
Supplementary and relevant information
pertaining to the topic.
If you do not read the entire Owner’s Manual, you may miss important information.
Observe all Cautions and Warnings.
VAN CONVERSIONS/CAMPERS
The New Vehicle Limited Warranty does not apply to body modifications or special
equipment installed by van conversion/camper manufacturers/body builders. US
residents refer to your Warranty Information book. Canadian residents refer to the
“What Is Not Covered” section of the Warranty Information. Such equipment includes
video monitors, DVD/Blu-Ray™, heaters, stoves, refrigerators, etc. For warranty
coverage and service on these items, contact the applicable manufacturer.
CONSUMER INFORMATION — TRUCK-CAMPER LOADING
This information is provided in fulfillment of the requirement by the United
States Government, Department of Transportation, National Highway Traffic Safety
Administration, that “every manufacturer of trucks that are capable of accommodating
slide-in campers, manufactured on or after April 1, 1973 shall provide... at the time of
original purchase to the first person who purchases the truck”... information on Truck
Camper Loading.
A slide-in camper document is provided in your vehicle’s glove compartment that
contains your Vehicle Identification Number, truck model, cargo weight rating, and the
forward/rearward limit of a camper. To obtain additional dimensional and technical
specifications for your vehicle, please visit
.
Figure 1 illustrates the dimensions describing the forward and rearward limits of the
zone in which the Center of Gravity (CG) of a slide-in camper must be located, to
provide satisfactory vehicle handling and to prevent overload of the front and rear
axles.
Figure 2 illustrates a proper match between truck and camper.
NOTE:
The camper Center of Gravity falls within the specified zone.
INTRODUCTION 9
1
