Light Electric
Heavy Electric
Light EOH
Heavy EOH
Type of Trailer Brakes
Electric Trailer Brakes
Electric Trailer Brakes
Electric Over Hydraulic Trailer
Brakes
Electric Over Hydraulic Trailer
Brakes
Load
*Under 10,000 lb
*Above 10,000 lb
*Under 10,000 lb
*Above 10,000 lb
*The suggested selection may change depending on
the customer preferences for braking performance.
Condition of the trailer brakes, driving and road state
may also affect the selection.
Display Messages
The trailer brake control interacts with the instrument
cluster display. Display messages, along with a single
chime, will be displayed when a malfunction is
determined in the trailer connection, trailer brake
control, or on the trailer
.
WARNING!
Connecting a trailer that is not compatible with the
ITBM system may result in reduced or complete
loss of trailer braking. There may be an increase in
stopping distance or trailer instability which could
result in personal injury.
CAUTION!
Connecting a trailer that is not compatible with the
ITBM system may result in reduced or complete
loss of trailer braking. There may be an increase in
stopping distance or trailer instability which could
result in damage to your vehicle, trailer, or other
property.
NOTE:
●
An aftermarket controller may be available for use
with trailers with air or EOH trailer brake systems.
To determine the type of brakes on your trailer and
the availability of controllers, check with your trailer
manufacturer or dealer.
●
Removal of the ITBM will cause errors and it
may cause damage to the electrical system and
electronic modules of the vehicle. See an authorized
dealer if an aftermarket module is to be installed.
Towing Requirements — Trailer Lights
And Wiring
Whenever you pull a trailer, regardless of the trailer
size, stop lights and turn signals on the trailer are
required for motor safety.
The Trailer Tow Package may include a four- and
seven-pin wiring harness. Use a factory approved trailer
harness and connector.
NOTE:
Do not cut or splice wiring into the vehicle’s wiring
harness.
The electrical connections are all complete to the
vehicle but you must connect the harness to a trailer
connector. Refer to the following illustrations.
NOTE:
●
Disconnect the trailer wiring connector from the
vehicle (or any other device plugged into vehicle’s
electrical connectors) before launching a boat into
water.
●
Be sure to reconnect once clear from water area.
Four-Pin Connector
1 — Ground
2 — Park
3 — Left Stop/Turn
4 — Right Stop/Turn
STARTING AND OPERATING 195
4