RAM 1500 2025, Руководство пользователя

Страница: 179 / 372

System On (Gray Lines)
●
When the system senses a lane drift situation, the
left lane line turns solid yellow. At this time, steering
assist warning is applied to the steering wheel in the
opposite direction of the lane boundary.
For example: If approaching the left side of the lane
the steering wheel will turn to the right.
Lane Drift (Solid Yellow Line)
●
When the system senses the lane line is being
crossed, the left lane line changes from solid yellow
to flashing yellow (on/off). At this time, vibration is
applied to the steering wheel.
For example: If approaching the left side of the lane
the steering wheel will turn to the right.
Lane Crossed (Flashing Yellow Line)
NOTE:
●
The Active Lane Management system operates with
similar behavior for a right lane departure.
●
If the turn signal is activated, and the vehicle begins
to depart the lane at the same time the Blind Spot
Monitoring (BSM) system detects another vehicle
in the BSM zones, the system will provide haptic
steering wheel vibration and/or steering assist
torque (if programmed in Uconnect Settings).
C
HANGING
A
CTIVE
L
ANE
M
ANAGEMENT
S
TATUS
Configurable settings for the Active Lane Management
system are available within the Uconnect system
ð
page 203 .
Selectable Warning Types:
●
Vibration Only
●
Steering Assist Only
●
Vibration And Steering Assist
Other configurable settings for this system are for the
intensity of the vibration (high/med/low), steering assist
strength (hi/med/low), and the warning zone sensitivity
(early/medium/late).
NOTE:
●
The system will not apply vibration and/or steering
assist to the steering wheel whenever a safety
system engages (Anti-Lock Brakes, Traction Control
System, Electronic Stability Control, Forward Collision
Warning, etc.).
●
The Blind Spot Monitoring system will be forced on
when the ALM system is enabled.
●
The ALM system will be suppressed when the Active
Driving Assist system (if equipped) is engaged.
PARKVIEW REAR BACK UP CAMERA — IF
EQUIPPED
The ParkView Rear Back Up Camera allows you to
see an on-screen image of the rear surroundings
of your vehicle whenever the gear selector is put
into REVERSE. The image will be displayed on the
Navigation/Multimedia radio display screen along with
a caution note to “Check Entire Surroundings” across
the top of the screen. After five seconds this note
will disappear. The ParkView Camera is located in the
center of the tailgate handle.
NOTE:
Removing the tailgate will disable the Rear View
Camera function.
STARTING AND OPERATING 177
4