85
ESPLXD-ET Controller
C
The Weather Signal screen appears. The status of the signal will
show “
Signal Detected
” when the unit is ready to receive
weather information.
b
b
NOTE:
If the status displays
“No Signal Detected”
wait two
minutes. If the signal is still not detected, go to the Alert Messages
section and follow the steps for “No Paging Signal Detected”.
D
The activation status will show “
Activated
” when the unit is
receiving hourly weather data for the programmed Weather
Region. Press
More
to view a log of received signals.
b
b
NOTE:
If the activation status shows
“Not Activated”
contact
your Weather Reach
TM
Signal Provider to establish services. (You
will need to provide the Weather Reach
TM
Signal Provider with the
ET Manager Receiver serial number, which can be found on the
label attached to the receiver/antenna). Once activated the ET
Manager Receiver will begin receiving hourly weather data.
c
d
E
The Counters screen appears. Press
More
to cycle through each
page.
b
b
NOTE:
The ET Manager retains data from every signal that is
received from the weather station, Weather Region, Rain Region
and the local Rain Gauge. The Counters can be reset to 0 by
pressing
Reset
.
e
ESPLXD-ET user-manual (670504-01) artwork_120716.indb 85
7/16/2012 3:48:28 PM