47
ESPLXD-ET Controller
Program Run Time
Review total Run Time for an individual program:
b
g
Turn the controller dial to Test All stations/Check System.
A
The System Diagnostics screen appears with Confirm Programs
selected; press Next.
B
The Confirm Programs screen appears. Press the Down Arrow
button to select Program Run Time; then press Next.
1
2
C
The Total Run Time screen appears and total Run Time is displayed
for the currently selected program.
b
b
NOTE:
If the desired program is not selected, use the Program
Select switch to change it. See Section B, Program Select Switch
for more details.
3
b
b
NOTE:
For stations set up for Cycle+Soak, the Cycle Time (when
irrigation is occurring) will be included in Program Run Time
calculations but Soak times will NOT be included. See Section D,
Cycle+Soak, for more details.
b
e
Change the Program Select switch and repeat this process to
review and confirm Program Run Times for other programs as
desired.
ESPLXD-ET user-manual (670504-01) artwork_120716.indb 47
7/16/2012 3:48:17 PM
