157
ESPLXD-ET Controller
C
The Set Flow Rates screen appears with Learn Flow selected; press
Next.
b
b
NOTE:
Ensure you have runtimes set up for all stations included
in a Learn Flow exercise prior to setting up a Learn Flow. If stations
without run times are included in a Learn Flow exercise, the
controller will issue an error message and cancel the Learn Flow
exercise.
D
The Learn Flow screen appears. Press the Down Arrow to choose
Select stations; then press Next.
3
4
E
Press the Yes and No buttons to select the stations you would like
to include. Press Next and Back buttons to select stations; then
press Next.
F
Press the + and – buttons to set the timed delay when you want
the Learn Flow exercise to start; then press Start.
b
l
Press and HOLD buttons to accelerate settings for hours and
minutes.
b
b
NOTE:
You can choose a delay between 0 hours, 0 minutes up to
24 hours.
5
6
G
A confirmation screen appears; press Start again to set the Learn
Flow exercise.
H
The Learn Flow Starting confirmation screen appears, confirming
the delay time until the Learn Flow operation will start.
7
8
b
b
NOTE:
Station or FloZone flow rates can still be entered manually.
See Set Flow Rates Manually in the FloWatch section.
ESPLXD-ET user-manual (670504-01) artwork_120716.indb 157
7/16/2012 3:48:51 PM
