139
ESPLXD-ET Controller
Scan Field Decoder Addresses
Set up field decoders automatically by scanning.
b
d
CAUTION:
Barcode scanning replaces any previous decoder
addresses stored in the controller. Be sure to complete the
previous Test Barcode Scanning Pen process before starting as the
test process will not update or replace your decoder addresses.
A
Locate the Programming Guide that came with the ESPLXD-ET
controller.
1
B
Ensure that the station Decoder Address Labels are affixed in the
proper locations on the Programming Guide (see Programming
Guide instructions for more details).
2
b
g
Turn the controller dial to ETM/IQ/PBC Settings.
C
The PBC Main Menu appears. Press the Down Arrow button to
select station Setup; then press Next.
D
The PBC station Setup (Scan When Ready) screen appears.
3
4
ESPLXD-ET user-manual (670504-01) artwork_120716.indb 139
7/16/2012 3:48:45 PM
