33
ESPLXD-ET Controller
Station Run Times
Run Times are the number of minutes (or hours and minutes)
that each station runs.
Once your stations are set up, you will want to assign irrigation Run
Times for each one. Station Run Times are particular to programs; so
typically stations are set for a single program.
b
b
NOTE:
Enter Run Times that your landscape would need during
the hottest, driest part of the year. The ET Manager will change
the Seasonal Adjust percentages to increase or decrease watering
run times depending on the weather conditions.
b
g
Turn the controller dial to Set Station Run Times.
A
The Set Run Times screen appears. Press the + and – buttons to
enter the station to program; then press Next.
b
b
NOTE:
If the desired program is not selected, use the Program
Select switch to change it. See Section B, Program Select Switch
for more details.
B
Press the + and – buttons to set the Station Run Time. Range can
be from 00 hours, 00 minutes (no Run Time) up to 24:00 hours.
b
l
Press and HOLD buttons to accelerate settings for hours and
minutes.
1
2
b
e
Change the Program Select switch and repeat this process to set
up additional Station Run Times for other programs as desired.
ESPLXD-ET user-manual (670504-01) artwork_120716.indb 33
7/16/2012 3:48:12 PM
