Chapter 3 Operating the Autoloader
Viewing Status Information
Quantum SuperLoader 3 User’s Guide
42
Table 3 Autoloader Status
Viewing Firmware
Version
3
To view the current firmware version, use the following procedure:
1
From the main menu, scroll to
Status
, and then press
Enter
.
2
From the
Status
submenu, scroll to
Autoloader
, and then press
Enter
.
3
From the
Autoloader
submenu, scroll to
Version
, and then press
Enter
.
A list of messages displays on the LCD. The firmware version is
listed as
Firmware: VX.XX
where
X.XX
is the current installed version
of the firmware.
Status
Message
Description
Magazines
L=*
The left magazine is present.
R=*
The right magazine is present.
SCSI ID
A digit 0 through 7
(default 5)
The assigned SCSI ID for the autoloader.
SAS
SAS Interface
SAS connection.
Topology
(Fibre Channel)
Auto Negotiate,
Loop, or P2P
The configured Fibre Channel connection.
Speed
(Fibre Channel)
Auto Negotiate,
1 Gig, or 2 Gig
The configured Fibre Channel speed.
Loop ID
(Fibre Channel)
0 – 127
Valid only with Topology set to Loop.
Mode
Random
The change mode is set to Random.
SEQUENTIAL
The change mode is set to Sequential.
BC Reader
Yes or No
A bar code reader is present.