Quantum Scalar i40, Руководство пользователя

Страница: 82 / 328

Chapter 4: Configuring the Library
Working With Partitions
56 Quantum Scalar i40 and Scalar i80 User’s Guide
5 Select one of the following media barcode formats (for reporting to
host) from the Set Media Barcode Format drop-down list:
• Standard Six — Six character barcode number with or without
a one or two-character media ID, for example, “XXXXXXL4” or
“XXXXXX”. Only the six character barcode is reported to the
host.
• Plus Six — Six character barcode number followed by a media
ID, for example, “XXXXXXL3”. Six character barcode and media
ID are reported to the host.
• Extended — Five to 15 characters total, including a barcode
number and optional media ID. All characters are reported to
the host, regardless of having a media ID or not. If a media ID is
included, the label must have a five to 13 character barcode
followed by a media ID, for example, “XXXXXXXXXXXXXL2”. If
a media ID is not included, the label must have a five to 15
character barcode, for example, “XXXXXXXXXXXXXXX”.
•
Media ID Last
— Five to 13 character barcode number followed
by media ID, for example, “XXXXXXXXXXXXXLT”. The media ID
is reported to the host last.
• Media ID First — Five to 13 character barcode number
preceded by media ID, for example, “L4XXXXXXXXXXXXX”. The
media ID is reported to the host first.
• Standard — (default) Five to 15 characters total, including a
barcode number and optional media ID. The media ID is not
reported to the host. If a media ID is included, the label must
have a five to 13 character barcode followed by a media ID, for
example, “XXXXXXXXXXXXXL3”. If a media ID is not included,
the label must have a five to 15 character barcode, for example,
“XXXXXXXXXXXXXXX”.
6 Type the number of slots to assign to the new partition into the
Enter Number of Slots text box.
7 Under the Select Drives section, assign one or more available tape
drives to the partition by selecting the check box located to the left
of the tape drive.
8 Click Apply .
9 Save the library configuration (see Saving the Library Configuration
on page 101).