Quantum Scalar i40, Руководство пользователя

Страница: 239 / 328

Chapter 8: Installing, Removing, and Replacing Components
Removing and Installing a Filler Plate
Quantum Scalar i40 and Scalar i80 User’s Guide 213
operator panel, select Tools > IVT and follow the instructions on
the screen. The IVT takes about 30 minutes.
19 Save the library configuration (from the Web client, select Tools >
Save/Restore Configuration
and save the configuration to a known
location).
20 Wrap the removed chassis in the antistatic wrapping that contained
the replacement chassis. Package the removed chassis using the
packaging that contained the replacement chassis. Use the enclosed
RMA information to send the chassis back to Quantum.
Removing and Installing a Filler Plate
A filler plate is required to cover every empty tape drive and power
supply slot on the rear of the library, in order to maintain proper library
cooling. If you remove a tape drive or power supply from the library, you
must cover the opening with a filler plate.
There are two types of filler plates:
• Tape drive
• Power supply
Removing and
Installing a Tape Drive
Filler Plate
The filler plate is half-height in size. If you remove a full-height tape
drive, you must install two filler plates to cover the opening.
Removing a tape drive filler plate
1 Unscrew the two captive thumbscrews and pull the filler plate out.
2 Save the filler plate in case you need to use it again.
Installing a tape drive filler plate
• The tape drive filler plate has no “top” or “bottom” orientation – it
can go in either way (see Figure 52 on page 215).
• Slide the filler plate into the slot and tighten the thumbscrews.