Quantum Scalar i40, Руководство пользователя

Страница: 164 / 328

Chapter 5: Performing Library Operations
Taking a Tape Drive Online or Offline
138 Quantum Scalar i40 and Scalar i80 User’s Guide
Operator Panel
1 Select Actions > Tape Drive > Change Mode .
2 Use the Up and Down buttons to select a tape drive.
3 Press Modify .
4 Use the Up and Down buttons to select Online or Offline .
5 Press Apply .
The new mode is displayed.
6 Press Exit .
Web Client
1 Select Operations > Drive > Change Mode .
The Change Drive Mode screen appears. This screen lists each tape
drive’s partition, location, state, current mode, activity, and version.
Note: If more than four tape drives are installed in the library, use
the
Page 1 of x
arrows to view the additional tape drives.
2 Locate the tape drive that you want to take offline or bring online.
In the tape drive table under Mode , the Current column indicates
the current mode of the partition. The New column contains an
Online/Offline button. The button toggles between modes.
3 Toggle the Online/Offline button to the desired mode.
Note:
If you change the mode of a control path tape drive to
offline, a caution dialog appears asking you to confirm the
mode change. For information on control path tape drives,
see Configuring Control Paths on page 67.
4 Click Apply .