Quantum Scalar i40, Руководство пользователя

Страница: 76 / 328

Chapter 4: Configuring the Library
Setting the Date, Time, and Time Zone
50 Quantum Scalar i40 and Scalar i80 User’s Guide
Setting the Date and
Time Manually
Date and time settings are used to log the date and time events take
place and to set the time for automatic backup and restore functions. At
a minimum, you should set the library’s date and time as part of the
initial library configuration.
The time is set to a 24 hour clock. For example, four o’clock in the
afternoon is entered as 16:00.
Operator Panel
1 Select Setup > Date & Time .
2 Modify the date and time using the method described in Navigating
and Editing on the Operator Panel on page 30.
Web Client
1 Select Setup > Date & Time .
2 Refer to the library Web client online help for detailed instructions.
To view the help, click the
Help icon in the upper right corner of the
screen.
Setting the Date and
Time Using the Network
Time Protocol
The library supports the Network Time Protocol (NTP). NTP allows you to
synchronize the library date and time with other components in your IT
infrastructure. Administrative users can either modify the date and time
zone settings manually or configure NTP.
If NTP is enabled, the time zone and IP addresses of at least one NTP
server must be configured on the library. Contact your network
administrator for NTP server IP address information.
Details on NTP settings include:
• At least one NTP server must be configured and available.
• NTP is enabled on the Date & Time screen. When NTP is enabled,
you cannot manually configure date and time. For more information
on setting date and time manually, see
Setting the Date and Time
Manually on page 50.
• You can enter an IP address for a primary and an alternate (optional)
NTP server.