Quantum Scalar i40, Руководство пользователя

Страница: 42 / 328

Chapter 2: Initial Installation and Setup
Unpacking the Library
16 Quantum Scalar i40 and Scalar i80 User’s Guide
Caution: Lift the library chassis at the sides. Avoid putting the
weight of the library chassis on the front bezel.
4 Remove the anti-static wrapping from the library. Keep the anti-
static wrapping intact so that you can use it later if needed.
5 Save the packing box, packaging material, and anti-static wrapping
in case you need to move or ship the library in the future.
6
Remove the robot restraint. The robot restraint consists of four (4)
thumbscrews, a mylar sheet, and a small metal clip, located on the
top cover of the library. See Figure 7 and Figure 8 .
a Partially unscrew (about 3 or 4 turns) all four thumbscrews, but
do not remove them.
b
Using your fingers, carefully push down on two diagonally
positioned thumbscrews. Push them down as far as they will go.
This ensures that the robot can initialize freely. See
Figure 7 .
Figure 7 Pushing Down on
Thumbscrews to Release Robot
Push down on two diagonally
positioned thumbscrews
c Completely unscrew and remove the four thumbscrews from
the top cover (see
Figure 8 ). Save the thumbscrews in case you
need to move or ship the library in the future.