QuadTech 1865, Инструкция по эксплуатации, Страница: 51 / 87

Operation Page 51 of 87
2.6.4.1 Save Setup
Setup
Save
I/O Utilities
NEW
DEFAULT
1865-1
1865-2
1865-3
1865-4
FLOPPY
page
down
d
e
l
Figure 2-22: Save Setup Test Conditions
Allows a set of test conditions to be stored in instrument memory or on floppy disk (if
optional drive is installed) for later recall. Test conditions are those that are user
programmable in the Setup and I/O menus, refer to paragraphs 2.6.2 and 2.6.3 above.
Stored setup conditions should always be backed up on disk when the floppy drive
option is present or recorded on paper when this option is not present.
NOTE
Setup conditions stored internally or on floppy disk using earlier software are not
compatible with version 2.0 or later.
To store the current set of test conditions as a new set in unit memory one needs to select
[NEW] in the Save Setup menu and enter the identifying name up to 8 characters under
which these conditions will be stored (allowable characters from the keypad include 0
through 9 and minus, characters can also include A through Z when operating from
remote control ). To save the setup under the name selected or to overwrite if the name
already exists one needs to answer Yes or No, Figure 2-23.