QuadTech 1865, Инструкция по эксплуатации, Страница: 24 / 87

Page 24 of 87 Introduction
1.3.2 Rear Panel Controls and Connectors
Figure 1-2 illustrates the controls and connectors on the rear panel of the 1865
Megohmmeter/IR Tester. Table 1-2 identifies them with description and function.
I/O PORT
RS 232 INTERFACE IEEE-488 INTERFACE BATTERY
NO USER SERVICEABLE PARTS
INSIDE
TO PREVENT ELECTRICAL SHOCK
DO NOT OPEN COVERS
REFER TO QUALIFIED PERSON
MADE IN USA
CAUTION: FOR CONTINUED
PROTECTION AGAINST FIRE
HAZARD REPLACE ONLY
WITH SAME TYPE AND
RATING OF FUSE
FUSE 250V
90-250V T2.5A 5x20mm
!
PARALLEL
PORT
90-250V
47-63Hz
100 W ATTS
MAX
REPLACE
W ITH
THREE SIZE AA
POSITIVE
TERMINAL OUT
1 2
6
5 4 3
8 7
Figure 1-2: Rear Panel Controls and Connectors
Table 1-2: Rear Panel Connectors and Controls
Reference
Number
Figure 1-2 Name Type Function
1 AC Inlet Module Black 3-Prong
Receptacle & Fuse
Drawer 3-wire connection for AC power source.
90-250V AC: T2.5A 250V 5x20mm Fuse
2 Vent Rear Panel Portion Instrument ventilation
3 I/O Port 36-pin Male
Amp 552302-1
compatible 36-Pin Connector for Component Handler.
Use with Amp 552302-1 plug & 552073-5
strain relief cover or ribbon cable clamp
connector 553600-1 or equivalent(s).
4 Parallel Port Not Available Not Available
5 Option 1865-03 Rear Panel Input Terminals: Ground, (+), (-)
and Guard for connection to DUT with High
Voltage Indicator
6 Battery 3, AA Size Batteries DC source for System Memory back-up.
3 AA batteries need to be replaced yearly.
7 RS232 Interface 9-pin DB9 Male 9-pin connector for RS232 I/O transfers
8 IEEE-488 Interface 24-pin Male 24-pin connector for IEEE-488 I/O transfers