QuadTech 1865, Инструкция по эксплуатации, Страница: 48 / 87

Page 48 of 87 Operation
2.6.3.4 IEEE-488
Setup
Utilities
IEEE
= 4
Mode Talk Talk/Listen
Disable Enable State
Address
I/O
Figure 2-20: IEEE-488 Interface Setup
Allows user setup of IEEE-488 interface operation. Selections include:
Address: 1 through 16
Mode: Talk or Talk/Listen
State: Disable or Enable
The instrument will function as either a Talk or a Talk/Listen device in a system
depending on the choice made by the operator under Mode. Talk is generally suited to a
simple system with no controller or other talkers, for example a printer. Talk/Listen
denotes full programmability and is suited for use in a system that has a controller or
computer to manage data flow. The "handshake" routine assures that the active talker
proceeds slowly enough for the slowest listener.
2.6.3.5 Handler
Allows user to turn Handler Interface function ON
or OFF. When off is selected, input
and output lines on the rear panel I/O interface connector are ignored
2.6.3.6 Results to Floppy
Allows user to store measurement results on floppy disk (if optional drive is present).
When selected, if a results file is not open, the user is prompted for the filename (up to 8
characters) and the file is opened.
To close a results file that is currently open, select Results to Floppy and press [ENTER]
to close. Display indicates “Closing the Results File”.
If a results file is open when a setup is saved, when the setup is later recalled the user will
be prompted for a results file name.