2 – Using SANsurfer Switch Manager
Exiting SANsurfer Switch Manager
2-12
59097-01 A
0
Click the
Start Application Without Specifying a Fabric
radio button to
open the SANsurfer Switch Manager window shown in
Figure 2-2
.
Click the
Open Configuration Wizard
radio button to open the Config
Wizard to configure a switch, add a new switch, replace/restore a switch, or
recover or edit an IP configuration of an existing switch.
Figure 2-2. SANsurfer Switch Manager Window
2.4
Exiting SANsurfer Switch Manager
To exit a SANsurfer Switch Manager application session, open the File menu and
select
Exit
. If you have not yet defined an encryption key, the Save Default Fabric
View File dialog, shown in
Figure 2-3
, prompts you to save the current fabric view
as the default fabric view file. Enter an encryption key in the Default Fabric File
Encryption Key field. Re-enter the encryption key in the Re-enter Encryption Key
to Confirm field. Click the
OK
button to save the current set of fabrics to the
default fabric view file in the working directory.
Figure 2-3. Save Default Fabric View File Dialog
