Proceq ZAA 2600.C, Инструкция по эксплуатации

Страница: 16 / 52

Page 16
•
Remount the side panels (15), the one with slit on the right side, the other one
on the left side.
•
Remount the start stop (1) and the end stop (2).
•
Move the start stop (1) backwards and the end stop (2) forward as far as
possible. Fasten the screws of the stops (1) and (2).
To protect persons and the apparatus, proper care must be taken when lifting
or carrying it. It is recommended to hold and carry the Proceq ZAA 2600 on
both sides of the housing. Always remove the glass plate before lifting or tilting
the device.
5.2 Startup
Connect the device to a power socket with the supplied power cable and turn on the
main switch (15).
Switch on the device by pressing the power button (10). The device will be ready
after a short start-up phase.
5.3 Shutdown
Turn off the device by pressing the power button (10). The display will turn off and
the device is shutting down. Before removing the power cable, turn off the main
switch (15).