Proceq ZAA 2600.C, Инструкция по эксплуатации

Страница: 17 / 52

Page 17
5.4 Disassembly for transport
Always switch off the device and unplug the power cable before dissembling.
To prevent transport damage, the device must be disassembled as follows:
•
Remove all friction finger sets from the tool holder bridge (4).
•
Remove the start stop (1) and the end stop (2).
•
Loosen the fixing screws of the side panels (16) and remove the side panels
(15).
•
Remove the tool holder bridge (4) and the tool holder side parts (5).
•
Remount the side panels (15), the one with slit on the right side, the other one
on the left side.
•
Remount the start stop (1) and the end stop (2), move them to the centre of the
device and fasten them.
•
Remove the glass plate.
Shipping condition:
The glass plate (3) must be removed for shipping.