Page 24
•
Press the „Zero“ symbol
on the touchscreen to set the start position.
Note: Do not zero directly at the start stop (1), but at least ca. 3 mm in front.
•
Set the number of double strokes and stroke length on the touchscreen.
(refer to chapter 8.1.8
“Setting the stroke length” on page 33).
Set the right stroke length: The testing head has to remain on the sample
over the whole stroke length.
Check the correct fit of the friction finger set before starting the procedure.
Do not lean over the unit during operation in order to avoid touching the tool
holder (18).
•
Start the crocking procedure by tapping on the symbol
.
•
Create the evaluation and test report according to the standard.
Содержание ZAA 2600.C
Страница 1: ...Proceq ZAA 2600 C Automatic Crockmeter Instruction Manual...
Страница 2: ......
Страница 13: ...Page 13 4 Device overview 12 13 14 4 1 5 2 11 3 16 9 10 17 7 6 15 8 18...