Proceq ZAA 2600.C, Инструкция по эксплуатации

Страница: 32 / 52

Page 32
The current position of the tool holder (18) can
be set to 0 by pressing the „Zero“ symbol
Confirm the appearing message with „yes.
Should this button be pressed accidentally
during the procedure, you can abort the process
by pressing “no”.
Note: Do not zero directly at the start stop (1),
but at least ca. 3 mm in front.
8.1.3 Crockmeter tests
Pressing the „Crock“ symbol
starts the procedure. The meter counts the
double strokes made. The crocking procedure stops automatically when the preset
number of double strokes has been reached.
One double stroke equates to one forward and backward movement of the tool
holder (18). Go to the menu on the touchscreen -> Choose setup and set the
machine mode to „Crock / Scrub“.
8.1.4 Scratch and mar resistance tests
The scratching procedure starts when tapping the symbol
„Applicator“ in moving
mode
„Single“
.
Go to the menu on the touchscreen -> select Setup, set the machine mode to
„Applicator“ and the moving mode to “Single”.
8.1.5 Pause
The procedure interrupts when tapping the “Pause” symbol
.
The procedure continues when tapping either the
symbol “Crock”
or
„Applicator“ in moving mode „Single“
.
8.1.6 Select layout
The layout indicator shows the name of the currently selected layout. A layout is a
renameable memory slot storing speed and stroke length. This is especially useful
for recurring tasks where the same speed and length are required again.
The current layout can be selected by tapping the layout field.