Proceq ZAA 2600.C, Инструкция по эксплуатации

Страница: 23 / 52

Page 23
•
Adjust the correct height of the tool holder-bridge (4) with the height
adjustment for tool holder (6).
The friction finger must be able to move up and down
– as shown on the
picture
– it must not sag.
Make sure that the tool holder-bridge (4) is mounted horizontally. It must not
be tilted.
•
Fix the friction finger set onto the tool holder-bridge (4) and fasten it with the
screw. The holder has to bear on the bridge horizontally.
The holder has to be vertical when fixing it.
•
If necessary, adjust the position of the friction finger set above the sample by
lifting the weight and pushing the tool holder-bridge (4).