Proceq ZAA 2600.C, Инструкция по эксплуатации

Страница: 29 / 52

Page 29
•
Fix the scratching set onto the tool holder-bridge (4) and fasten it with the
screw. The holder has to bear on the bridge horizontally.
The holder has to be vertical when fixing it.
•
If necessary, adjust the position of the scratching set above the sample by
lifting the adapter and moving it on the tool holder-bridge (4).
•
Press the „Zero“ symbol
on the touchscreen to set the start position.
Note: Do not zero directly at the start stop (1), but at least ca. 3 mm in front.