5
2
2.1
Getting Started
Quick Start Guide
Monitor StationV2
Owner’sManual
4. Turn on the Monitor Station V2’s power by pressing the“|”symbol at the top of the
Power switch.
按下电源开关上方的
"|"
符号，打开
Monitor Station V2
的电源。
2.1.2
Connecting Devices to the Monitor Station V2’s Inputs
将设备连接到
Monitor Station V2
的 输入端
1. Zero the Monitor Station V2’s front-panel Main Output Level knob, the Cue Output
knob, and the individual headphone Level knobs by turning them fully counter
clock wise.
将
Monitor Station V2
的前面板
”Main Output Level”
主输出电平旋钮、
”Cue
Output”
旋钮和各个耳机电平旋钮逆时针方向完全旋转，使它们
”Zero”
归
零。
2. Connect your primary audio source (computer audio interface, mixer, or other
stereo source) to the balanced ¼”TRS ST1 L/R inputs on the back of your Monitor
Station V2.
3. Ifyouhaveasecondary stereoaudio sourceorcue audio source—suchas other
interface outputs or the auxiliary outputs of your mixer—connect it to the
balanced ¼”TRS ST2 L/R inputs.
TheMonitorStationV2canaccommodateavarietyofanalog
and digital input sources. Here’s how to attach them.
Phone, personal music player, or other device with 1/8” stereo output.
Connect
theoutput tothe rear-panel1/8”AuxInjack usingan unbalanced,stereo1/8”cable.
(With a phone or personal music player,the headphone jack is its output.)
