PRESONUS TubePre V2, Руководство пользователя

Страница: 31 / 37

21
5 Resources
Monitor StationV2
5.2 Frequently Asked Questions
Owner’s Manual
5.2 Frequently Asked Questions
常见问题
Why can’t I hear the Talkback microphone?
为什么我听不到对讲机的声音？
Only headphones whose Sourceswitch is in the Cue(down)
position can hear the Talkback microphone.
只有
”Source”
音源开关在
”Cue”
（向下）位置的耳机才
能听到对讲机的声音。
Why do I see levels on the LED meter but I can’t hear anything through the speakers?
为什么我在
LED
仪表上看到音量，但通过扬声器却听不到任何声音？
The LED meter measures the Monitor Station V2’s
input, so seeing a level is only half the story.
LED
仪表测量
Monitor Station V2
的输入，所以看到音
量只是故事的一半。
• Connect and calibrate your speakers according to Section 2.1.6 .
• Ensure the correct Speaker Select button is lit and that its rear-panel
Speaker Level Adjust knob is turned up.
•
The Main Output Level knob may be turned down. Disengage the Talk,
Mono, Mute, and Dim buttons and then slowly turn up the Main output
level knob.
• Move your speakers to a different output to verify its original outputs are
functioning properly.
• Connect the input source directly to your speakers to verify the speakers
are functioning properly.
•
根据
第
2.1.6
节
，连接并校准你的扬声器。
•
确保正确的
”Speaker Select”
扬声器选择按钮被点亮，其后面板的扬声
器音量调节旋钮被调高。
• “Main Output Level”
旋钮可能被调低。解除
”Talk”
、
”Mono”
、
”Mute”
和
”Dim”
按钮，然后慢慢调高
“Main Output Level”
旋钮。
•
将你的扬声器移到不同的输出，以验证其原来的输出是否正常。
•
将输入源直接连接到你的扬声器，以验证扬声器是否正常工作。
I have everything turned all the way up, but my speakers still aren’t loud enough. What gives?
所有都调高了，但我的扬声器还是不够响。这到底是怎么回事？
The Monitor Station V2 is not an amplifier. Its speaker outputs should be
connected to the inputs of a powered speaker or to a speaker amplifier.
The only outputs with separate gain controls are the headphone
amplifiers.
Monitor Station V2
不是一个功放。它的扬声器输出应连接到有源扬声
器的输入端或扬声器放大器。唯一有独立增益控制的输出是耳机放
大器。
Why doesn’t the Main output level knob control the Main Out L/R line outs?
为什么
Main output
音量旋钮不能控制
Main output
的
L/R
线路输出？
The Main L/R line outs are for devices requiring a signal unaffected by
the Monitor Station V2’s controls, such as an external digital or CD
recorder.