manualshive.com logo in svg

Precision Rated Optics TP-P6, Руководство пользователя, Страница: 92 / 94

Поделиться
Скачать
Precision Rated Optics TP-P6 Скачать руководство пользователя страница 92

Tel: (888) 545-1254      •      Fax: (415) 358-4602      •      Email: [email protected]

www.PrecisionRatedOptics.com

92

20.1 Terms of Warranty

All Precision Rated Optics

®

 products are warranted against defective material and workmanship for 

a period of one (1) year from the date of shipment to the original customer. Any product found to be 

defective within the warranty period will be repaired or replaced by Precision Rated Optics free of 

charge. In no case will Precision Rated Optics, Inc. liabilities exceed the original purchase price of the 

product.

20.2 Exclusion

The warranty on your equipment shall not apply to defects resulting from the following: 

●

 Unauthorized repair or modification

●

 Misuse, negligence, or accident

Precision Rated Optics, Inc. reserves the right to make changes to any of its products, at any time, 

without having to replace or change previously purchased units.

20.3 Warranty Registration

A warranty registration card is included with the original shipment of equipment. Please take a few 

moments to fill out the card and mail or fax it to the local Customer Service Center of Precision Rated 

Optics, Inc. to ensure proper initiation of your warranty term and scope of your warranty.

20.4 Returning Instruments

To return instrument for reasons of yearly calibration or other, please contact the local Customer 

Service Center of Precision Rated Optics, Inc. to obtain additional information and a RMA# (Return 

Materials Authorization number). You shoulld also describe the reasons for the return of the equipment, 

to allow us the popportunity to better service you. 

Note:

To return the PRO TP-P6 in the case of repair, calibration or other recommended maintenance, please 

note the following:  

●

 Be sure to pack PRO TP-P6 with soft cushion like Polyethylene, so as to protect the shell of 

PRO TP-P6.

●

 Please use the original hard packing box. If use other packing material, please ensure at least 3 cm 

soft material around PRO TP-P6. 

●

 Be sure to correctly fill out and return the warranty registration card, which should include the 

following information:  company name, postal address, contact, phone number, email address and 

problem description.

●

 Be sure to seal the packing box with exclusive tape.

●

 Be sure to ship to our local representative or directly to us in a reliable way.

20 Warranty 

Содержание TP-P6































































































Отзывы:

Нет отзывов