Precision Rated Optics TP-P6 Скачать руководство пользователя страница 2

Страница: 2 / 94

Tel: (888) 545-1254 • Fax: (415) 358-4602 • Email: [email protected]

www.PrecisionRatedOptics.com

Notice

No part of this manual may be reproduced in any form or by any means (including electronic storage

and retrieval or translation into a foreign language) without prior agreement and written consent from

Precision Rated Optics

, as governed by international copyright laws.

Warranty

The material contained in this document is subject to change without notice. Precision Rated Optics

makes no warranty of any kind with regard to this material, including, but not limited to, the implied

warranties of merchantability and fitness for a particular purpose. Precision Rated Optics

shall not

be liable for errors contained herein or for incidental or consequential damages in connection with

furnishing, performance, or use of this material.

The battery is a consumable part and is not subject to the PRO TP-P6 warranty.

ISO 9001 Certification

Produced to ISO9001 International Quality System Standard as part of Precision Rated Optics

, objective

of continually increasing customer satisfaction through improved process control.

Precision Rated Optics

objective, which continually increasing customer satisfaction through improved

process control.

Safety Instructions

During each stage of operation of this instrument, please always observe the following safety

instructions. Not taking proper safety precautions, or not following the instructions, will violate the

safety standards of the design, manufacturing and application of these instruments. In no case will

Precision Rated Optics bear the responsibilities for consequences incurred by violation of the following

instructions.

Information contained in this manual is believed to be accurate and reliable. However, no responsibility is assumed by

Precision Rate Optics for its use nor for any infringements of patents or other rights of third parties that may result

from its use. No license is granted by implication or otherwise under any patent rights of Precision Rated Optics.

The information contained in the publications is subject to change without notice.

Содержание TP-P6































































































Результаты поиска

Содержание TP-P6

Отзывы:

Precision Rated Optics TP-P6, Руководство пользователя, Страница: 2 / 94

Результаты поиска

Содержание TP-P6

Отзывы: