Tel: (888) 545-1254 • Fax: (415) 358-4602 • Email: [email protected]
www.PrecisionRatedOptics.com
4
Laser Safety Announcements
Warning!!
PRO TP-P6 is a laser device. Users should avoid looking directly into the optical output. The use of a fiber
scope or magnifier should also be avoided. The use of such devices can focus a highly intense beam onto
the retina, which may result in permanent eye damage.
Make sure that the optical fiber or cable is not in use and there is no laser light in the fiber before testing
with the OTDR module. Failure to do so may result in an imprecise test trace, or even permanent damage
to the PRO TP-P6.
Caution
Laser Radiation:
To avoid serious eye injury, never look directly into the optical outputs of fiber optic
network equipment, test equipment, patch cords or test jumpers.
●
Always avoid looking directly into the optical output port, when PRO TP-P6 is operational.
●
Always replace protective dust cap on the detector port when PRO TP-P6 is not being used.
●
Always avoid looking directly at unconnected end of optical fiber in testing and make the unconnected end
pointing at a non-reflective object if available.
Warning!!
●
The AC/DC adapter should only be used indoors.
●
The PRO TP-P6 should be well ventilated to avoid overheating.
●
Never use electric tools near flammable gas or flammable materials.
●
In order to avoid electric shock, please do not use the device if there is obvious damage on the outside (top
cover, panel, etc)
●
Only qualified repair personnel are authorized to perform adjustments, maintenance or repairs to the TP-P6.
●
Even with the power off, the TP-P6 may still contain an electrical charge.
Caution
Battery: The battery used in the PRO TP-P6 is a rechargeable lithium battery. If the TP-P6 is to remain
unused for longer than two months, the battery should first be fully recharged before storage, and
charged again before being placed back into service. Do not recharge the batteries for more than 8
hours. Do not take the batteries out without the assistance of a qualified repair technician. Do not expose
batteries to fire or intense heat. Do not open or mutilate batteries. Avoid touching the electrolyte in the
batteries, which is corrosive and can cause injury to the eyes, skin or clothing.
External Power:
The PRO TP-P6 can be powered externally, using the supplied AC/DC charger/power
adapter. For proper operation, the TP-P6 requires 24VDC.
Содержание TP-P6
Страница 1: ...TP P6 Manual Multifunctional Test Platform...