Precision Rated Optics TP-P6 Скачать руководство пользователя страница 18

Страница: 18 / 94

Tel: (888) 545-1254 • Fax: (415) 358-4602 • Email: [email protected]

www.PrecisionRatedOptics.com

1.11 Using the Li-Ion Rechargeable Battery

●

The battery for PRO TP-P6 is a Lithium Ion rechargeable battery.

●

It requires approximately 4 hours to fully charge from a completely depleted state.

●

When the PRO TP-P6 is charged by AC/DC power adapter, the

indicator on the front panel will

turn red. It will turn green when charging is complete.

●

When the PRO TP-P6 is powered on and being charged, the LCD will also indicate the charge status.

Note:

If the TP-P6 is to be stored for a prolonged time, please charge the battery to 50%-70% before storing.

Caution

Keep the battery away from fire or intense heat. Never open the unit, unless instructed to do so by a

certified PRO repair technician.

1 General Information

Содержание TP-P6































































































Результаты поиска

Содержание TP-P6

Отзывы:

Precision Rated Optics TP-P6, Руководство пользователя, Страница: 18 / 94

Результаты поиска

Содержание TP-P6

Отзывы: