Tel: (888) 545-1254 • Fax: (415) 358-4602 • Email: [email protected]
www.PrecisionRatedOptics.com
61
11.17 Reanalyzing a Trace
The user can reanalyze a trace at any time. Reanalyzing a trace will accomplish the following:
●
Create a new event table for a trace.
●
Reanalyze a trace utilizing new-introduced features offerred by updated software.
●
Update an existing event table -if the data has been modified or repairs have been made.
To reanalyze a trace:
1. In the [Event] options, press [Analysis]. The TP-P6 will then initiate a new trace.
2. After the analysis is complete, the new results will be displayed in the event table.
Note:
●
If the thresholds used are too restrictive, meaning that few or no events were detected, please alter
the threshold settings and initiate a new test using wider parameters.
11.18 Analyze the Optical Fiber in a Specific Optical Fiber Span
Because a PON optical fiber span has a splitter (multiple spans), the user needs to set the proper finish
threshold (optical fiber End Detecting Threshold) to analyze the end event, which can be affected by the
splitter.
The thresholds must be set before initiating a test, or the results may be innaccurate or inconsistent.
11 Trace Analysis and Event Operation
Содержание TP-P6
Страница 1: ...TP P6 Manual Multifunctional Test Platform...