Tel: (888) 545-1254 • Fax: (415) 358-4602 • Email: [email protected]
www.PrecisionRatedOptics.com
80
The “General Setup” interface is shown in Fig 16.2.
“Buzzer”:
Switch on or off to open/close the alarm buzzer function. With this feature turned on, when
the TP-P6 detects a power value beyond the normal range, a buzzer will automatically sound.
“Unit”:
Switch to select between “W” or “dBm”.
“Auto Zero”:
This function provides an easy method of auto zeroing the Power Meter, which can be
used to rectify the TP-P6 power value under non-luminous states, for day-to-day testing purposes.
Warning!!
Always replace the protective cap on the Optical Power Testing output, and ensure that the tie-in is
completely covering the port, making it impossible for laser light to escape.
“Wavelength”:
Select this to display one wavelength individually or three wavelengths together.
Create or delete the Threshold value in the “Threshold” interface, as shown in Fig 16.3.
Click “setup”=> “Current Thre. Set” to select a certain threshold.
The user may also select a default threshold set, as shown on the left-side of the display. When a
threshold is selected, information pertaining to that specific threshold will be displayed on the right-side
of the display.
Fig 16.3 PON Power Meter - Threshold Interface
16 Using the MPN Module
Содержание TP-P6
Страница 1: ...TP P6 Manual Multifunctional Test Platform...