Precision Rated Optics TP-P6 Скачать руководство пользователя страница 13

Страница: 13 / 94

Tel: (888) 545-1254 • Fax: (415) 358-4602 • Email: [email protected]

www.PrecisionRatedOptics.com

Icon

Status

Meaning

Power On/Off

Off

System off

Green, constant

System on

Charging Indicator

Red, bspaning

Low battery, charging needed

Red, constant

Charging with power adapter

Red, bspaning

Low battery

Green, constant

Charging complete, with power adapter

Off

Power adapter unplugged or connection is poor

Laser Indicator

Red, bspaning

Laser on

Off

Laser off

1.6 Front Panel Keys Instruction

1.5 Front Panel Indicators Introduction

Name

Function

Start/Stop

Press to start. Press again to stop.

Launch selected module in main interface.

Move up or extended function to be defined, please refer to Help of current interface.

Move down or extended function to be defined, please refer Help of current interface.

Move left or extended function to be defined, please refer Help of current interface.

Move right or extended function to be defined, please refer Help of current interface.

●

Enter (Temporarily no function assigned)

BACK

Back

HELP

Enter the Help section of the current interface.

LIGHT

LCD brightness adjustment.

4-level brightness, press to toggle between different levels.

POWER

Power on/off
Press to power on system when system is off.
When system is on, press and hold 1 second to enter “Screensaver” mode for lower power

consumption. Press and hold 3 seconds to power off the system.
In “Screensaver” mode, press any key and hold 1 second to restore normal status (Or by

clicking anywhere on the touchscreen with the stylus, by clicking the mouse left key or the

adjustment knob)

1 General Information

Содержание TP-P6































































































Результаты поиска

Содержание TP-P6

Отзывы:

Precision Rated Optics TP-P6, Руководство пользователя, Страница: 13 / 94

Результаты поиска

Содержание TP-P6

Отзывы: