Tel: (888) 545-1254 • Fax: (415) 358-4602 • Email: [email protected]
www.PrecisionRatedOptics.com
39
7.8.1 Switch Information and Function Windows
At any time, the user can switch to a different tab or window simply by clicking it with the stylus.
7.8.2 Events Info Reference
Within any interface, while using any module or function, the user can simply click the or
buttons to scroll through the events, then click on a specific event and the detailed information relating
to that event will be displayed.
7.8.3 Reanalyze
If the trace data does not provide the required information, or unexpected results are obtained, you may
perform a new trace at any time.
To reanalyze a trace:
1. If necessary, review or reset the threshold.
2. In {events}, click [analyze]. The system will reanalyze the trace.
3. When the analysis is complete, the events list will show the new results.
Note:
●
Reanalyzing a trace may cause certain previously detected events to be deleted. The ability of the
TP-P6 to detect events depends largely upon the threshold setting at the time the trace is initiated.
Events that occur outside of the given threshold will not be detected.
7.9 Uploading a Trace to a PC
Once transferred to a computer, the trace data can be analyzed, stored and manipulated in many ways.
This is particularly useful when performing fiber characterization.
To copy or move the trace to a computer:
1. The user can copy the saved trace to a computer by connecting it directly using the supplied USB
cable, or by using a “thumb” drive, or similar USB storage device. The trace data can then be analyzed
using network management, such as FiberBase, which is also available through Precision Rated
Optics.
Note: Any USB “thumb” drive can be used for the transfer if data from the TP-P6 to the computer.
7.10 Get Help While Using the OTDR
While using the OTDR module, click “?” or “HELP” to display detailed information. Click “BACK” to exit.
7 Testing with the OTDR
Содержание TP-P6
Страница 1: ...TP P6 Manual Multifunctional Test Platform...