- 14 -
1500_GB-TRANSPORT_2719
TRANSPORT
GB
From headland to transport position
075-09-38
For safety reasons, switch off p.t.o. and
wait for rotors to come to a standstill.
Changing from working to transport
position is only to be carried out on level,
firm ground.
1. Open stopcock (Pos. E)
A
E
TD44/94/8
ST
2. Swivel left and right guard hoops (6) in and secure with
linchpin (6a).
3. Ensure that the swivel range is clear and that no-one
is standing in the danger area.
4. Swivel both tine arms up to the transport position by
setting the single-acting control unit at "Raise".
Beware!
Check that the locking hooks (10) are
engaged properly.
5. Close stopcock (Pos. A)
6. Lower deflection rail (10)
1
7. Lock transport safeguard pin in the transport position
(C).
C
Machine dimensions in transport
position
If the transport position is prepared correctly, the following
dimensions will not be exceeded:
Type
Height
(m)
Height
reduced
(m)
Width
(m)
Length
(m)
TOP 612
3.40
2.90
2.70
6.08
