- 10 -
1500_GB-ANBAU_2719
ATTACHING
GB
Parking the machine
The machine can be parked in either the working position
or transport position.
Ensure stability when parked!
- Fold front and rear support stands down and lock
- Pull cardan shaft (GW) off and place on support.
- Close stopcock (Pos. A)
- Uncouple hydraulic lines (EW) from tractor
- Remove rope from tractor cabin
- Disconnect electro-cable (EL) from tractor
- Uncouple machine from tractor.
- When parking in the transport position: Make certain
that the transport safeguard pin is locked in the transport
position (C).
C
Should problems occur when uncoupling:
- Set control valve (ST) briefly at "LOWER".
Doing this will reduce any existing residual pressure in
the plug connection and the hydraulic line can then be
easily uncoupled .
A
E
TD 26/92/16
s
h
0
ST
Note:
The parking height can be reduced by removing the
tine arms. During transport, place the tine arms in the
tine arm rack provided (see diagram).
