- 20 -
1500_GB-EINSATZ_2719
OPERATION
GB
Set the cam track
When grass remains lying outside the swath, then the cam
track can be adjusted.
1. Park machine on level ground and secure against rolling.
(use wheel chocks)
2. Remove the three plastic covers (1) from the openings
on the underside of the rotor unit to gain access to the
screws (2) on the cam track.
1
3. Loosen the three screws (2) on the cam track.
4. Adjusting the cam track: Turn the rotor unit by the tine
arms and adjust the cam track in the slot so that the
fodder is gathered more efectively.
2
5. Tighten the three screws (2).
6. Push the plastic covers (1) into the openings.
7. Carry out a trial run. Repeat the procedure until you are
satisfied with the result
