- 23 -
1500_GB-WARTUNG_2719
MAINTENANCE
GB
Lubricating the transmission:
Fill with liquid grease: if required
1. Open oil filling screw (1). The crown wheel toothing
is easily visible when the filling screw is open.
2. Pour liquid grease in through the filling screw (1)
until the crown wheel is almost completely covered.
3. Close filling screw (1)
4. Distribute the grease by turning on the pto.
5. Check the grease level with the drain plug open. The
crown wheel should be almost completely covered .
6. If necessary, continue to increase the amount of
liquid grease or reduce it via the drain plug (2).
1
2
Change liquid grease:
After the first 50 hrs; then every 500 hrs
1. Bring the machine to the transport position
2. Open drain plug (2)
2
3. Drain liquid grease.
4. Close drain plug (2)
5. Continue as in section "Fill with liquid grease"
Note:
Only enter the danger area when there is
no other option. Make sure beforehand
that
- the tractor motor is turned off and the
ignition key is removed
- the single-acting hydraulic line ball
cock is closed.
- the rotor arms are in working position
and the rotors are at a standstill.
- the combination is secured against
rolling away.
