- 11 -
1500_GB-ARBEITSSTELLUNG_2719
WORKING POSITION
GB
5. Swivel both rotor units down to the working position.
• Set the single-acting control valve (ST) briefly at
"Raise", pulling the rope simultaneously. Doing this
will release the locking hooks (11).
• Then set the single-acting control valve (ST) at
"Lower" and swivel the rotor units down to the ground.
6. Refit the tine bearers to the rotor and secure with linchpin.
Be aware of the fitting direction of the tine arms
Beware!
Do not interchange the left (15) and right
(16) tine bearers.
7. Swivel the left and right guard hoops (6) out and secure
with spring pin (6a).
8. Lock transport safeguard pins in the working position
(D).
D
From transport to working position
075-09-05
Switching from working to transport
position is only to be carried out on level,
firm ground.
1. Lower machine to the working height of "75 cm" using
the tractor's hydraulics (see sketch).
TD 28/94/10
75 cm
2. Open stopcock on hydraulic hose (pos. E)
A
E
TD44/94/8
ST
3. Swivel both deflection frames (10) up and fasten with
pins (11).
10
11
4. Ensure that the swivel range is clear and that no-one
is standing in the danger area.
